A pure acrylic emulsion, containing inert inorganic fillers, quartz aggregates and fade- resistant colourfast pigments. The product is fast drying, weatherproof, durable, anti-slip, non-flammable and resistant to UV rays, salts and acid rain. It will not chip, peel or flake. It meets and exceeds CGSB and ASTM standards. It can be used for exterior or interior, vertical or horizontal applications subjected to light to medium traffic such as balconies and decks.
--- STORE IN A DRY AREA - MUST NOT FREEZE --

Do not apply product below grade, over a damp surface, if the ambient temperature is expected to be under 7°C (45°F) or above 40°C (105°F) in the next 24 hours or when rain is imminent. The surface temperature of the panel must not exceed 30°C (86°F). All efforts are being made to ensure uniformity of colour through the production lots. It is the end-user’s responsibility to use containers with the same production lot numbers or to mix together, prior to application, acrylics from different production lots to ensure a uniform colour on any surface to be painted.

Surface must be clean and dry. Using FINEX CLEANER, remove all dirt, efflorescence, paint, dust, oil and anything that can interfere with the adhesion of coating. Rinse with plenty of water and let dry.

Mix thoroughly. For better results, use a drill equipped with a mixing paddle.

Apply with a short, medium or long nap roller, or a textured (plastic wire or textured foam) roller for application. Saturate the roller with coating and apply evenly, going back and forth. Cross-roll to obtain a uniform texture. All tools must be cleaned with water immediately after use. Dry product must be removed mechanically or dissolved with acetone. Depending on atmospheric conditions, the product will set in 1-2 hours and fully cure in 2 days, more or less.